oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if75.0m-30c 75.0mhz if saw filter 29.1 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if75.0m-30c january 2011 rev a 75.0mhz if saw filter 29.1 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1=150 nh, l2=82 nh output l2=180 nh, c1=8 pf source/load impedance 50 ?
oscilent part number 835-if75.0m-30c january 2011 rev a 75.0mhz if saw filter 29.1 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 75.0 - insertion loss at fo db - 27.0 29.0 group delay variation (fo14.52mhz) ns - 48 80 absolute delay time at fo us - 3.35 - temperature coefficient ppm/ c - -72 - amplitude ripple (fo14.52mhz) db - 0.89 - bandwidth at -1db mhz 29.00 29.11 - bandwidth at -3db mhz - 29.32 - bandwidth at -40db mhz - 30.26 30.35 relative attenuation @fo 15.1mhz dbc - 35 - ultimate rejection db - 50 -
oscilent part number 835-if75.0m-30c january 2011 rev a 75.0mhz if saw filter 29.1 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?40.0 db ripple variation fo14.42mhz group delay variation fo14.42mhz
oscilent part number 835-if75.0m-30c january 2011 rev a 75.0mhz if saw filter 29.1 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo14.52mhz group delay variation fo14.52mhz relative attenuation
oscilent part number 835-if75.0m-30c january 2011 rev a 75.0mhz if saw filter 29.1 mhz bandwidth product specification p. 5 www.oscilent.com smith chart
|
